The 5 Ton Roll ‘n’ Cool has a compact footprint (35 ¼ inch width x 60 inches long) and is the lightest (410 pounds) in the marketplace. It will go through a 3 foot wide door and two average people can lift it into a regular sized pickup truck body. The 5 Ton is our production model. We can build, from 3 ton in size to 50 ton portable units in single phase and three phase 208 – 230v and 460 – 480v on a special design/build basis. Three ton – 10 ton units can have pneumatic casters mounted for easy portability. Larger units can be skid mounted with forklift pockets or trailer mounted.
There are many applications that the 5 Ton Roll “n” Cool portable Air Condition units can be used. Some of these uses are listed below:
All American Portable Air has fabricated approximately 100 of the 5 Ton Roll “n” Cool Portable Air Condition units beginning in 2013. We have 40 of these a/c units in our inventory ready for rent. These a/c units are simple to operate and are very dependable with minimal mechanical issues. They produce 60,000 BTU (5 TONS) with a 2,000 CFM fan, There are only 2 controls on the a/c unit. There is a 50 amp waterproof breaker box with an on off switch and a mechanical Johnson Controls Thermostat. If you can move the switch to the on position and adjust the thermostat, you can convince the machine to make COLD air (SIMPLE). The unit has a skid base and a full cage made of aluminum tube (very lite material, but very strong). Attached to the base are four 8 inch pneumatic, foam filled tires, two fixed and two swivel. This portable air conditioner is the most mobile and easiest to move available for sale anywhere. (One person can move this through grass, without any help) This amazing cold air machine has a 14 inch round supply and a 14 inch round return transition with a 4 inch collar that makes it easy for installing flex duct. The Roll “n” Cool is painted with Rust-Oleum white and can be touched up with a spray can available at any hardware store.
“We used All American Portable Air twice in 2017, both were great experiences. Our office AC went out in the middle of summer and Eli was able to get a large unit /generator on the property the day after we spoke. He showed us how to use everything and helped set up everything up. We also used Eli to heat up space for our Christmas party. He was very patient with us through the planning process and invited us out to the shop to view all of the equipment. We had an elaborate setup with the heating tubing, but everything worked out great. I would recommend All American to anyone with heating and cooling needs.”
– Tamie S. | LEED Green Associate
“All American Portable Air over the past three to four years have supplied all over our large scale project temporary heating needs and done so in a most efficient and professional manner. One of the biggest headaches on construction sites during the winter months is spending time dealing with tanks and heating units that either always seem to be empty or guys are having to move around. AAPA has greatly simplified this through their higher quality heating units and large capacity tanks. The other benefits that due to the quality of the heaters we are able to heat more square footage will less heaters and tanks = fuel and money.”
– Jason Larkins | Orion Building Corp.
To speak with one of our Climate Control Engineers, call us at (866) 526-0365 or Get a Quote by clicking on the button below…